FREDS Tech Tip: SCI Interface FKTC

FREDS Tech Tip: SCI Interface FKTC

In this tip clip, Dave Hobbs talks about what to do if you have a vehicle with no PCM data. You plug in your brick, and you go to pull codes or look at PIDs in this late 90s, whatever, early 2000 Chrysler. It’s got CCD. You think you’re talking on the CCD. You’re actually talking on SCI, and scan tool just sits there and says no communications. What could the problem be? Is it a bad scan tool? Bad computer? Bad bus wires? Well, in this clip Dave gives some quick pointers on what to look for next.

This clip is an excerpt from the 240 minute comprehensive "F.R.E.D Kicks The CAN" with Dave Hobbs, available from Automotive Video.

In this tip clip, Dave Hobbs talks about what to do if you have a vehicle with no PCM data. You plug in your brick, and you go to pull codes or look at PIDs in this late 90s, whatever, early 2000 Chrysler. It’s got CCD. You think you’re talking on the CCD. You’re actually talking on SCI, and scan tool just sits there and says no communications. What could the problem be? Is it a bad scan tool? Bad computer? Bad bus wires? Well, in this clip Dave gives some quick pointers on what to look for next.

This clip is an excerpt from the 240 minute comprehensive “F.R.E.D Kicks The CAN” with Dave Hobbs, available from Automotive Video.

You May Also Like

The Standard® Advantage

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. This video is sponsored by Standard®.

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. And for more than 100 years, Standard® has had a lot to be proud of. Standard is a true manufacturer with a full line of vehicle control and engine management components, offering more than 50,000 professional quality parts.

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

ADAS Calibration Aborts

Knowing the common “hiccups” can save you time and money.

Other Posts

Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Can You Jumpstart an EV?

First thing’s first: Find the LV battery, which could be anywhere in the vehicle.

Understanding What Antifreeze/Coolant Actually Does

Today, each manufacturer has its own formula for best results in their vehicles. This video is part of the Group Training Academy.

How The Vehicle Cooling System Functions

Here’s what to know to clarify cooling questions you’re asked at the service counter. This video is part of The Group Training Academy.