Finishing Valve Seats on Today's Multi-Valve Cylinder Heads

Finishing Valve Seats on Today’s Multi-Valve Cylinder Heads

The techniques we have used over the years have worked great on older, large-valved engines. However, some of today's newer engines with the tiny valves require new techniques and new equipment. For years we have been able to "bully" our way through, but now we must learn to hold back and provide a more gentle touch.

The techniques we have used over the years have worked great on older, large-valved engines. However, some of today’s newer engines with the tiny valves require new techniques and new equipment. For years we have been able to "bully" our way through, but now we must learn to hold back and provide a more gentle touch.

Use a more gentle approach when grinding valve seats. You may have asked this before when working on multi-valve cylinder heads: "What is happening to my valve seats? I’ve tried everything! A new stone, stone holder, pilot and even a new dressing diamond but I can’t achieve seat alignment."

The problem lies more on technique and the power source than in the tooling. Although it’s probably not time for a complete "overhaul" of your equipment and technique, you may need to re-evaluate and make a few changes in the way you’re used to doing things. This is probably one of the easiest and least costly changes you can make to your shop.

Today’s new heads are "dimensionally challenged." Smaller valves require smaller pilots. The pilot area that aligns the newer heads are almost always one half to one third the diameter of its predecessors. This small pilot size allows more deflection, throwing our work off-center. In the past, you may have unknowingly relied on your large diameter pilots for support but pilots are meant for alignment only.
Straight air grinders eliminate side pressure and evenly distribute the weight over the seat.
Remember these tips:

1. Be gentle! Don’t push or crowd the valve seats. These smaller seats cannot be bullied like you’re used to doing on the larger cylinder heads. Work must be kept closer to your body, do not work at arm’s length. You’ll have much more control over tooling while reducing deflection and fatigue.

2. Eliminate side pressure. Use a sturdy head stand, an ultralight air hose and light-weight, straight grinder (such as Goodson’s AG-4500). The weight is evenly distributed over the seat. Using an angle grinder motor for your power source is cumbersome and off-center. Since you are grinding valve seats on-center, you should drive the seat grinding tooling on-center as well.

3. Use a free-cutting stone. Using Nickel-Chrome valve seat wheels for small valves virtually eliminate the need to push or crowd the valve seat.

Tech Tip courtesy of Goodson Tools.

You May Also Like

UniClutch Launches Clutch System in the United States

From Australian manufacturer Clutch Industries, UniClutch is a clutch system that delivers uncompromised performance.

UniClutch and UniClutch Sport will be the first iterations of this system to launch in the U.S. UniClutch's dual core technology significantly boosts torque capacity without compromising drivability. Its one-of-a-kind, patented and adaptable design fits a multitude of vehicles, simplifies inventory management, expedites clutch replacement time, and lessens common installation problems. Compared to UniClutch, UniClutch Sport offers a further 15% more torque capacity and a sport-tuned pedal feel for more serious enthusiasts. These features create a clutch system with mass appeal for consumers and aftermarket businesses alike, as the industry grapples with a continuously challenging supply chain and the need to find labor efficiencies.

Automotive Hall of Fame Announces Class of 2024 Inductees

Six honorees whose efforts helped shape the automotive and mobility marketplace will be recognized.

Castrol Turns 125, Debuts New Market Strategy

As part of the new strategy, Castrol will explore opportunities in battery thermal management, digital and service solutions and data center immersion cooling.

Advance Auto Parts Announces ‘National Battery Day’ Promo

DieHard battery giveaways and complimentary battery testing will be part of nationwide festivities held on Feb. 18.

FCS Introduces 18 New Numbers in February

The new release includes 4 shock absorbers and 14 suspension struts.

Other Posts

Tenneco Introduces Add-On Valve Technology 

The company says the RideRefine SDD valve brings new levels of versatility, tunability and comfort to passive damper performance.

AP Emissions Releases New Part Numbers for February

AP Emissions Technologies has released 12 new SKUs that cover six million VIO in the month of February.

Lumileds Debuts New Philips Automotive Lighting Website

The site features an entirely new design that brings together the full breadth of the Philips portfolio of automotive lighting and accessories in North America.

Standard Motor Products Expands Emission Control Program

SMP’s program features more than 3,500 parts, including EVAP, EGR and positive crankcase ventilation products.