Failing Pilot Bearing, Bushing on Manual Transmissions

Failing Pilot Bearing, Bushing on Manual Transmissions

Most rear wheel drive, and some front wheel drive, vehicles with manual transmissions use a pilot bearing/bushing. The pilot bearing/bushing

Most rear wheel drive, and some front wheel drive, vehicles with manual transmissions use a pilot bearing/bushing. The pilot bearing/bushing ­supports and centers the transmission input shaft and clutch disc. When the clutch is disengaged, the pilot bearing/bushing allows the flywheel to ­maintain engine RPM while the input shaft is ­slowing down and stopping. 
 
Types of pilot bearing/bushing include conventional ball bearings, needle bearings and sintered bronze bushings. 
 
When a pilot bearing/bushing fails, a vehicle may exhibit: 
• No release; 
• The transmission may pop out of gear; 
• Noise; 
• Vibration; and
• Catastrophic failure of the transmission if not fixed
 

Fig. 2

Early signs of the pilot failing may be noise whenever the clutch is disengaged. The driver may also notice that the transmission is difficult to shift between gears or hard to put into reverse or first gear when stopped. 
 
When the pilot is failing, or has failed, the input shaft will be allowed to walk around causing it to go off center. When this happens, the transmission input shaft will begin moving around inside the transmission causing the gears and synchronizers to be off center resulting in the transmission popping out of gear.
 
If the vehicle has a high output engine, the misalignment will cause the input shaft gear to not mesh with the counter shaft gear properly and ultimately will cause the gears to fail.  (see figures 1 and 2).
When a clutch is replaced, the pilot bearing/bushing should always be replaced as part of the service.  
 

You May Also Like

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.

Snap-on national training manager Keith Wray will continue to hold weekly new product training sessions throughout the year that give professional technicians the opportunity to learn more about Snap-on Fast-Track Intelligent Diagnostics tools such as the ZEUS, TRITON and APOLLO series. 

The online training and question and answer sessions are free of charge and are conducted as follows:

Air Ride Diagnostics: Reservoirs and Compressors

The secret to diagnosing air ride problems is knowing what criteria the system uses to regulate the compressor/reservoir and having the right tool.

Mazda SkyActiv Engine Service Tips

These engines have been reliable, but there are four pattern failures you might see.

Honda Indirect TPMS Systems

Honda indirect TPMS systems do not have air pressure sensors inside the tires.

Honda Oil System Inspection

The leading cause of low oil pressure-related complaints with Honda vehicles is the oil level.

Other Posts

AMSOIL Introduces New OE 0W-40 100% Synthetic Motor Oil

The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.

UniClutch Launches Clutch System in the United States

From Australian manufacturer Clutch Industries, UniClutch is a clutch system that delivers uncompromised performance.

Automotive Hall of Fame Announces Class of 2024 Inductees

Six honorees whose efforts helped shape the automotive and mobility marketplace will be recognized.

Castrol Turns 125, Debuts New Market Strategy

As part of the new strategy, Castrol will explore opportunities in battery thermal management, digital and service solutions and data center immersion cooling.