European car manufacturers are perhaps the most focused on extended interval oil options when compared to domestic or Asian nameplate manufacturers. While domestic manufacturers were promising 5,000-mile oil changes on this side of the pond, the oil change intervals in Europe were at 10,000 miles or more.
European manufacturers abide by the standards set by the European Automobile Manufacturer’s Association (ACEA). These standards are based on testing developed by the European Engine Lubricants Quality Management System (EELQMS). Think of ACEA as the SAE of Europe and EELQMS as the API/ILSAC in the U.S.
Just like in the U.S., the European automobile manufacturers can supersede the industry ACEA certification for the oil to better suit their engine technology and extended drain intervals. The ACEA introduces new specifications or sequences, as engines and oils change and the EU introduces new emissions specifications. A new sequence usually means the oil has better performance and a reduction in ingredients like phosphorus or sulfur. New sequences typically mean more testing and procedures.
The ACEA oil specifications are also time sensitive. If a vehicle manufacturer introduces a new vehicle with a new ACEA sequence specification, the oil must be available to the public and on shelves.
In addition, ACEA and ILSAC try to keep the A/B, GF-5 and SN specifications for oils similar. They do this to ensure that vehicles made by U.S. manufacturers that are imported into Europe and European vehicles do not have huge compatibility problems if the wrong oil is installed.
COMPATIBILITY
Are API/ILSAC GF-5 and SN Plus oils compatible with ACEA-rated oils? Yes, you can mix the two oils of the same weight together and they will not explode or degrade the performance of either product. However, the oil might not be compatible with the long-term needs of the engine.
“A” and “B” (1-5) rated oils are stable, stay-in-grade oils intended for use at extended drain intervals in gasoline and diesel engines (cars and light vans). They are designed to be capable of using low-friction, low-viscosity oils with a high-temperature/high-shear (HTHS) rate viscosity.
The “C” rating designation is for catalytic converter-equivalent oils. But, there are also A5/B5 oils with a low sulfated ash, phosphorous and sulfur content.
MERCEDES-BENZ
Mercedes-Benz oils follow the same oil specification trends as other German manufacturers that have had to update to lighter-weight oils to meet Euro 4 emission standards and drain intervals. Most oils that have an A5/B5 ACEA rating can meet the Mercedes-Benz specification, but check the product data sheet to ensure compatibility.
VW/AUDI
Volkswagen and Audi have issued 13 different motor oil specifications over the years. Most Volkswagens produced after 2000 have the long drain-interval option, WIV (Wartungs Intervall Verlängerung), or longer service intervals. Volkswagen started with VW 500.00 and it is currently developing VW 509.00. Why does VW issue so many oil standards? It wants to protect the internal engine components and catalytic converters that might be covered by a 100,000-mile drivetrain or emissions warranty.
The progression of its oil standards is in response to changing vehicle injection technology (gas and diesel) and lighter oil viscosities. Also, specifications were issued to meet changing emissions mandates limiting sulfur, ash and phosphates (SAP). These specifications are very similar to A5/B5 ACEA specifications.
Some of the standards and variants are for vehicles you may never see, like the Lupo. Many of the oil standards supersede or improve previous specifications and are backdate compatible. This means a vehicle that specifies VW 502 oil can use VW 504 oil.
To be sure that you select the correct oil to meet VW’s standards, make sure to check the owner’s manual or repair information database.
BMW
BMW has only three oil specifications — BMW Longlife-98, BMW Longlife-01 and BMW Longlife-04. These oils typically meet and exceed ACEA and API SN standards. But, some brands meet and exceed both specifications.
When selecting bulk oil to service European vehicles, you will need to do your homework. Most oils have a product data sheet that will list what standards are being met by the oil. These can include OEM, ILSAC/API and ACEA specifications. Doing this homework is the best way to pair the best engine oils with the vehicles you service.
