ADAS And Brake Pads
ADAS can adapt, but if a replacement part falls outside the performance parameters it can cause problems.
Tech Tip: A/C Service With The R-1234yf Refrigerant
Vehicles with R-1234yf have different service fittings to prevent cross-contamination with different refrigerants.
Master Cylinders Need Periodic Inspections
Dual master cylinders are configured to operate two separate braking systems.
Red Flags On Vehicle Inspections
Inspecting these 12 things will keep your customers safe and happy.
Accommodating Head Lift
Head lift is a common occurrence in any internal combustion engine. In basic terms, head lift can be described as the lifting of the cylinder head from the deck surface of the block as pressure builds within the power cylinder. While head lift occurs on all engines, the rate at which the head(s) lift is
Intake Manifold Sealing
Aftermarket intake manifold gaskets must seal gases and fluids in a high temperature, dynamic environment with the added variability of casting geometry that may be outside of original OEM specifications.
Servicing HVAC Systems With The New R-1234yf Refrigerant
SAE-certified productivity guidelines require specific equipment performance, purity and safety guidelines.
TPMS Tips & Tricks – Relearn Procedures
Here are some steps to make the TPMS relearn process easier.
Why Do Modern Vehicles Require Precious Metal Spark Plugs?
Understanding modern ignition systems will help complete preventive engine maintenance during tune-ups.
Today’s Fuel Pumps Operate Differently Than In The Past
Understanding fuel pressure and volume is more complicated thanks to fuel injection and other modern technology.
Diagnostic Strategies For Stop/Start Systems
This function of the power management system uses several modules to decide when the engine needs to stop and start.
10 Cartridge Oil Filter Tips
Cartridge oil filters make potential mistakes more likely because they require more knowledge and tools to properly change the oil than a canister filter.
