Import Car Advertise | Subscribe | Contact Us | About Us
Currently viewing 1 to 10 of 19

Alignment & Suspension Specs: Ford Focus
In 2000, the Ford Focus represented a radical change in the domestic small car segment. Now as we enter a new decade, the current Focus platform is going into its last year of production and not too much has changed in the alignment department in 10 years, except the specs from year to year. The second-generation Focus uses the same suspension configuration as the 2000-2007 models. The restyled second... More
Alignment & Suspension Specs: 2006-2010 Honda Civic
Built on a high-rigidity unit-body platform, the 2006-current Civic has a MacPherson strut front suspension and multi-link rear suspension. The 8th-generation Civic switched from a high mounted steering rack to a low mounted one and significantly increased caster. In the alignment bay, the 8th-generation Civic does not hold any surprises. But, it does require a sharp eye to spot potential problems... More
Suspension & Alignment Specs: 2007-2010 Dodge Caliber
The Dodge Caliber is a compact car produced by the Dodge division of Chrysler. The same basic platform is used for the Sebring, Avenger, Jeep Patriot/Compass and Mitsubishi Lancer. This is a "Net Build" vehicle with only toe adjustments built into the vehicle. Some adjustments for caster and camber can be made by moving the sub-frames. More
Z Sport, Part II: Powering Subaru Engine & Chassis Upgrades
A few months back, I highlighted a project car being built by Z Sport. The car is now back together and running. Charles Damewood, the car’s owner and a principle at Z Sport, has been driving the car to break in the engine, and get an idea of what needs to be sorted out as far as engine management before doing a full on dynamometer test. As soon as fuel mapping and software issues are resolved, we... More
Alignment and Suspension Specs: Ford Fusion 2006-2010
In 2006 when Ford introduced the Fusion, many could not help but to compare it to the third- and fourth-generation Taurus models. The previous generation had a reputation for broken springs and tire shredding bushing problems. The 2006-2010 Fusion is a different story. More
Alignment & Suspension Specs: 2003-2007 Cadillac CTS
The first-generation Cadillac CTS was introduced in 2003 and ended production in the 2007 model year. The Cadillac CTS was built on GM's rear-wheel drive Sigma platform. The CTS for years 2003-2007 came with two suspension packages­ - standard and sport. The packages have two different alignment specifications. The RPO codes for these packages can be found on the underside of the spare tire cover... More
Tech Tip: Sagging Ford Truck Needs a Lift
Some Ford Super Duty truck owners may complain that their vehicle leans or sags to the right or left, when looking at the vehicle from the rear. It may be necessary to install Ford-approved shims to correct the vehicle lean condition, as described in this Tech Tip. More
Why do Automotive Ball Joints, Tie Rods and Suspension Links Wear Out?
The ball and socket joint has been around on animals and humans for millennia. This simple design has been used on vehicles since the turn of the century because it works. But, just like our hip joints, ball and socket joints like ball joints, tie-rods and sway bar links wear out. More
Tech Feature: Nissan Brake and Suspension Repairs; Solving Noise Complaints
At first, you may not think brake and suspension systems are closely related. But when it comes to noise and vibration complaints, you don’t want to be looking at one without considering the other. More
GM Tech Tip: Rear Independent Suspension for AWD Vehicles Out of Alignment
Drivers of some General Motors vehicles with independent rear suspensions and All-Wheel-Drive (AWD) may complain of excessive rear tire wear, clunking noises and possible instability. Technicians may also notice excessive negative camber of more than 3.5 degrees and toe-out conditions that cannot be corrected with normal adjustments. More
 
ImportCar on Facebook
© 2010 Babcox Media
•
3550 Embassy Parkway, Akron, OH 44333
•
330-670-1234
•
(FAX) 330-670-0874