Some vehicles may experience a squeaking or grinding noise originating from the front or rear disc brakes when the brake is applied. The concern may be related to the brake pads sticking and not moving freely in the slides due to lack of lubrication and/or corrosion. To address this concern, remove, clean and lubricate the brake pad contact area.

• Remove the caliper mounting bracket as required.
• Clamp the mounting bracket into the vice and clean the rust and/or corrosion using a wire brush.
• Lubricate the cleaned areas with brake caliper grease.
• Use grease on both sides of the anti-squeak shim if equipped.

Caution: Make sure NO grease gets on the braking surfaces. If grease gets on the pad friction material or rotor, they must be cleaned before road testing the vehicle.

Courtesy of ALLDATA